UPS Battery Systems

Needs and Product Solutions

ENSURED RELIABILITY, REDUCED RISK OF NETWORK OUTAGE

reducing-risk-of-network-outage

Data Centers, Manufacturing Facilities, Healthcare institutions and other mission critical operations invest in UPS battery systems to ensure absolute reliable power. However, these UPS battery systems are dependent on batteries to store energy and batteries by their very nature can be unreliable.

Solution

Battery management programs and systems that utilize UPS battery monitoring, like Midtronics CELLGUARD Battery Monitoring System and CELLTRON Battery Analyzers increase system reliability by keeping close watch on batteries.

IMPROVED BATTERY MAINTENANCE EFFICIENCY

improved-maintenance-efficiency

UPS battery system maintenance is key to continued reliable operation, but this maintenance is periodic, leaving risk between checks and can also be expensive

Solution

Midtronics offers UPS battery monitors, battery analyzers, systems and programs to reduce risk and time and capital spent on UPS battery system maintenance.

LOWERING POWER CONSUMPTION, REDUCING COST

lowering-power

Properly maintained and operating UPS battery systems last longer and consume less energy to charge.

Solution

Midtronics CELLGUARD Battery Monitoring Systems and CELLTRON Analyzers help address inefficient battery systems through the use of UPS battery monitors and battery analyzers.

Midtronics Product Solutions

celltronlogo product

CELLTRON Portable Battery Analyzers

CELLTRON ADVANTAGE

MODULAR STATIONARY POWER BATTERY TESTER CELLTRON ADVANTAGE
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  •  

  • Test Range:
  • 100 - 19,990 mhos
  •  

  • Test Data Storage:
  • Unlimited internal memory USB to flash drive or PC
  •  

  • Test Data Transfer To PC:
  • USB, two way communication with SW for setup & download
  • Capacity Test Manager:
  • Voltage and time capture
  •  

  • Battery Reference Developer
  • AC Ripple Suppression Technology
  • Full Multimedia / Scope Function
  • Field Upgradable Software
  • Generator/Fleet Vehicle Battery Testing Capability
  • Integrated Temperature Measurement
  • Variation Based Analysis of Conductance vs. Baseline
Learn More

CELLTRON ULTRA

CRITICAL POWER BATTERY TESTER CELLTRON ULTRA
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  •  

  • Test Range:
  • 100 - 19,990 mhos
  •  

  • Test Data Storage:
  • Removable SD memory card stores 500 strings/locations of 480 tests
  • Test Data Transfer To PC:
  • InfraRed data transfer SD memory card
  •  

  • Capacity Test Manager:
  • Voltage and time capture
  •  

  • Battery Reference Developer
  • AC Ripple Suppression Technology
  • Full Multimedia / Scope Function
  • Field Upgradable Software
Learn More

CELLTRON ADVANCED

Celltron_Advanced
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  •  

  • Test Range:
  • 100 - 19,990 mhos
  • Test Data Storage:
  • 16 strings / memory locations of 480 test results
  •  

  • Test Data Transfer To PC:
  • InfraRed data transfer
  •  

  • Midtronics Service Center upgradable software
Learn More

CELLTRON ESSENTIAL

essential browse
  • Key Application:
  • Telecom OSP (Outside Plant)
  •  

  • Test Range:
  • 100 - 19,990 mhos
  • Test Data Storage:
  • 1 string / memory locations of 480 test results
  •  

  • Test Data Transfer To PC:
  • Not available, IR printing only
  •  

  • Midtronics Service Center upgradable software
Learn More

SCP 6/12

SCP
  • Key Application:
  • Small Systems (Emergency lighting, alarm panels)
  •  

  • 6 and 12 volt nominal batteries from 1.2 to approximately 55 ampere hours in capacity
  •  

  • Voltmeter:
  • +6.0 to +14.0 VDC
  • Conductance:
  • 20 to 1200 siemens
  •  

  • Operating Temperature:
  • -18 to 50ºC (0 to 120ºF)
Learn More
Cellguard product log

CELLGUARD Wireless Battery Monitoring System

CELLGUARD

CELLGUARD BATTERY MONITORING SYSTEM
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  •  

  • Communications Interfaces:
  • Ethernet 10 Mbps
  • RS232 or serial USB ( @ 57.6 kbps)
  • 802.15.4 compliant RF transport
  • @ 2.4 GHz Radio Band
  •  

  • Temperature:
  • Operating Temperature
  • ( 0° C to +65° C)
  • Storage Temperature
  • ( -10° C to +80° C)
  •  

  • Power Requirements:
  • Base Coordinator Unit Power:
  • Powered by 9 V DC wall plug adaptor
  • or powered from VTC (optional)
  • VTC Unit Power:
  • Powered from the battery (< 60 mA)
  • 2 V Sensor Power:
  • Powered from the battery under surveillance
  • 12 V Sensor Power:
  • Powered from the battery under surveillance
  •  

  • Conductance Measurement Range:
  • 100 to 15,000 Siemens (cell mhos)
  •  

  • Strap Resistance Measurement:
  • 2 micro Ohms minimum
  •  

  • Test Current:
  • 2V & 12V Sensors
  • Test current is approximately 5 Amps RMS
  • Voltage Measuring Characteristics:
  • Sensor Voltage range: 1.4 V to 2.5 V per cell
  • Resolution: +/- 20 mV
  •  

  • Sensor Negative Battery:
  • Post Temperature Reading
  • Temperature Range: ( 0° C to +65° C)
  • Measurement Accuracy: (+/- 2° C)
  •  

  • String Voltage Measurement:
  • Input Range: 42 to 600 Volts DC
  • AC Ripple
  • Peak AC Ripple Detection
  •  

  • String Current Measurement:
  • Float State: 300 milli-Amps to 10 Amps
  • Charge State: 10 to 200 Amps
  • Discharge State: 10 to 200 Amps
  •  

  • Physical Dimensions:
  • Base Coordinator Unit:
  • 5.08 in x 5.25 in x 2.25 in
  • 12.9 cm x 13.3 cm x 5.7 cm
  • VTC String Monitor:
  • 5.08 in x 5.25 in x 2.25 in
  • 12.9 cm x 13.3 cm x 5.7 cm
  • 2 V & 12 V Sensor:
  • 4.45 in x 3.15 in x 1.5 in
  • 11.3 cm x 8 cm x 3.8 cm
Learn More
CELLTRAQ PRODUCT LOGO

Data Management

CELLTRAQ

celltraq
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  •  

  • Windows Operating System
  •  

  • Tomcat Web Server:
  • 2GB RAM or above (4GB recommended)
  • CPU:
  • 2.6 GB or above
  • SQL Server Database:
  • 4GB RAM or above (8GB recommended)
  •  

  • Installation CD provides, in addition to the Server Application, Database, and SMTP Tester Interface:
  • Installation Manual
  • JDBC-SQL Server Driver
  • Java Development Kit (JDK)
  • Tomcat
Learn More

BATTERYNET

batterynet preview
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  • Industry’s proven source for effective battery data management and report automation
  • More consistent, effective and efficient battery maintenance
  • Professional level reports
  • Proven efficiency in providing early warning on battery degradation
  • Establishes battery inventory stocking levels based on unit density and change
Learn More

FACILITYWARE

facilityware
  • Key Application:
  • Telecom Central Office
  • Telecom OSP (Outside Plant)
  • Wireless MTSO (Flooded and VRLA) / Wireless Base Stations
  • Centralized record keeping and maintenance data on everything (outside of batteries) that is key to a well-run operation.
  • User configurable database and reporting tools
  • Collects and reports on critical information regarding generators, switchgear, power boards, HVAC and CRAC units, and much more
  • Reliability in scheduling the next maintenance or responding to an audit request
Learn More
  
Select the product(s) that needs service or support:
  
  
  
  
Preferred method of contact:
  
  

Enter the code in the image:
  
Select:
  
  
  
  
Preferred method of contact:
  
  

Enter the code in the image: